unisonic technologies co., ltd mbr20100c diode www.unisonic.com.tw 1 of 3 copyright ? 2012 unisonic technologies co., ltd qw-r601-016,c schottky barrier rectifier ? features * 20 amps total (10 amps per diode leg) * guard ring for transient protection * low forward voltage drop * high surge capability * low power loss/high efficiency ? symbol ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 mbr20100cl-ta3-t MBR20100CG-TA3-T to-220 a k a tube mbr20100cl-tf3-t mbr20100cg-tf3-t to-220f a k a tube mbr20100cl-tq2-r mbr20100cg-tq2-r to-263 a k a tape reel mbr20100cl-tq2-t mbr20100cg-tq2-t to-263 a k a tube note: pin assignment: a: anode k: cathode (1) t: tube, r: tape reel (2) ta3: to-220, tf3, to-220f, tq2: to-263 (3) g:halogen free, l: lead free mbr20100cl-ta3-t (1)packing type (2)package type (3)lead free
mbr20100c diode unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r601-016,c ? electrical characteristics (t a =25c, unless otherwise specified) parameter symbol ratings unit maximum repetitive peak reverse voltage v rrm 100 v maximum dc blocking voltage v r 100 v working peak reverse voltage v rwm 100 v maximum pms reverse voltage v r ( rms ) 70 v average forward rectified output current per leg i out 10 a total device 20 a non-repetitive peak forward surge current 8.3ms single half-sine-wave i fsm 150 a forward voltage t c =25c i f =10a v f 0.85 v i f =20a 0.95 v t c =125c i f =10a 0.75 v i f =20a 0.85 v maximum dc reverse current t c =25c i r 0.15 ma t c =125c 150 ma junction capacitance (note 1) c j 1000 pf operating temperature t j -55 ~ +150 c storage temperature t stg -55 ~ +150 c notes.1: applied v r = 4.0v and f = 1.0mhz.
mbr20100c diode unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r601-016,c ? typical characteristics 0.1 80 1.1 0.9 1.0 0.5 10 instantaneous forward voltage, v f (v) forward characteristics 0.3 0.7 100 5000 50 1.0 1000 reverse voltage, v r (v) junction capacitance 0.1 10 1.3 t j = 125c pulse width = 300 s 2% duty cycle 0.1 0.3 330 utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|